Petzl waterproof headlamps:
the IP X8 standard

Petzl waterproof headlamps are identified by the waterproof symbol. This indicates the maximum depth that the headlamp can be used.

Petzl headlamps are tested according to the EN 60529 standard. This test measures the degree of protection a headlamp offers against water entry, on a scale from 0 to 8: the IP index.

What does waterproof mean?

Petzl waterproof headlamps are rated IP X8, the highest level of the IP code. This means that water will not penetrate the headlamp, even if immersed for a prolonged period of time, down to the depth indicated on the waterproof symbol.

But beware: maintaining the waterproof qualities of your headlamps requires that you respect certain maintenance guidelines, as detailed below.

Waterproof headlamps maintenance

Choosing a waterproof headlamp is a decision that should not be made lightly, since maintaining its waterproof properties requires careful maintenance.
If moisture cannot enter the case, then it cannot escape either. If the inside of your waterproof headlamp gets exposed to moisture, (while changing the batteries, bulb, etc.), you must follow these maintenance guidelines before storing it:

• open the headlamp (battery case and lamp body),
• remove the batteries,
• if there are any foreign objects (gravel, twigs, etc.), rinse the headlamp thoroughly with clean water and clean the seals with a cotton swab,
• dry with a soft cloth and air dry completely.

A lamp exposed to sea water or other potentially corrosive environments must be rinsed after use (follow the guidelines above).

To preserve the waterproof qualities of your headlamp, it is important to regularly apply a silicone-based grease to the seals. Make sure you properly close the battery case and bulb housing when reassembling the headlamp.

If these guidelines are not followed, Petzl cannot guarantee the lifespan of its waterproof headlamps. Refer to your product's technical notice for more information.

Storing waterproof headlamps

As a general rule, never store a headlamp wet.

The batteries of waterproof headlamps must be removed before storage. Defective or used batteries and the presence of moisture could cause the creation of gases in the battery case that may dangerously build up pressure (the lamp is sealed from the inside as well as from the outside).

Refer to your product's technical notice for more information.